詳細(xì)說明
Product Name | Material | Standard | Specification | Application |
Structure pipe | 10# 20# 45# 27SiMn 40Mn2 35Cr 35CrMoA | GB/T8162-2008 | ∮8-1240*1-200 | Apply to structure, engineering scaffolds, machining |
Dimension tolerance:
| OD（D） | TH（S） | ||
Cold drawn pipe | OD(mm) | Tolerance(mm) | TH(mm) | Tolerance(mm) |
＞30～50 | ±0.3 | ≤30 | ±10％ | |
＞50～219 | ±0.8％ | |||
Hot rolled pipe | ＞219 | ±1.0％ | ＞20 | ±10％ |
Mechanical property：
| Grade | Tensile strength（MPa） | Yield strength（MPa） | Elongation（％） |
GB/T8162 | 10 | ≥335 | ≥205 | ≥24 |
20 | ≥390 | ≥245 | ≥20 | |
35 | ≥510 | ≥305 | ≥17 | |
45 | ≥590 | ≥335 | ≥14 | |
Q345 | ≥490 | ≥325 | ≥21 | |
15CrMo | ≥440 | ≥295 | ≥22 | |
12Cr1MoV | ≥490 | ≥245 | ≥22 | |
ASTM A53 | A | ≥330 | ≥205 | According to ASTM A53 |
B | ≥415 | ≥240 |
Chemical composition：
| Grade | Chemical composition（％） | |||||||||
C | Si | Mn | P | S | Cu | Ni | Mo | Cr | V | ||
GB/T8162 | 10 | 0.07～0.14 | 0.17～0.37 | 0.35～0.65 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | / | ≤0.15 | / |
20 | 0.17～0.24 | 0.17～0.37 | 0.35～0.65 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | / | ≤0.25 | / | |
35 | 0.32～0.40 | 0.17～0.37 | 0.50～0.80 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | / | ≤0.25 | / | |
45 | 0.42～0.50 | 0.17～0.37 | 0.50～0.80 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | / | ≤0.25 | / | |
Q345 | 0.12～0.20 | 0.20～0.55 | 1.20～1.60 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | / | ≤0.25 | / | |
15CrMo | 0.12～0.18 | 0.17～0.37 | 0.40～0.70 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.30 | 0.40～0.55 | 0.80～1.10 | / | |
12Cr1MoV | 0.08～0.15 | 0.17～0.37 | 0.40～0.70 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.30 | 0.25～0.35 | 0.90～1.20 | 0.15～0.30 | |
ASTMA53 | A | ≤0.25 | / | ≤0.95 | ≤0.05 | ≤0.06 | ≤0.40 | ≤0.40 | ≤0.15 | ≤0.40 | ≤0.08 |
B | ≤0.30 | / | ≤1.20 | ≤0.05 | ≤0.06 | ≤0.40 | ≤0.40 | ≤0.15 | ≤0.40 | ≤0.08 | |
關(guān)閉返回